Patches are all the rage! Add these to bags, clothing, hats, whatever you can dream up!

Adhere these to any fabric: 100% Cotton, 100% polyester, polyester/cotton blends and denim. 

These patches can be ironed on sweatshirts, tank tops, tote bags, home decor and more. Please note any surface that could potentially melt is not suggested due to the heat required to adhere the patch. Patches can be applied with an iron or heat press; best results with a heat press.

*Recommend to use a lint roller to remove any excess dust or loose fibers before pressing your garment.

*Pre-press your garment where patch will be applied for 10-20 seconds.

*Cover patch with a Teflon sheet or thin cloth.

➡️Iron Application Instructions:
When applying the patches with an iron, set your iron to high heat; no steam. Press firmly straight down on the patch for 45 seconds. DO NOT MOVE IRON BACK AND FORTH!

Turn the garment inside out and press firmly straight down for 30 seconds.

Let area cool for 60 seconds. If the patch does not fully adhere, then repeat the press for another 45 seconds until it adheres.

➡️Heat Press Application Instructions:
When applying the patch with a heat press, set your heat press temperature to 310-350 degrees Fahrenheit (depending on your press), and press for 20 seconds with medium pressure. After cooling, if needed, repeat press again for 20 seconds if patch is not completely adhered.

➡️Care Instructions for garments: Suggest to wash inside out in cold water, hang to dry and no fabric softener or bleach (which includes whitening agents). Ideally, hand wash and hang to dry. Following these care instructions will extend the life of the item.